Good Quality XD-10CAP waste plastic recycling plant

waste plastic recycling plant 1 CE& ISO 2 .hot sales in India 3 Unharmful emission 4 environmental protection

                  10T/D waste plastic recycling plant

 

Application

It is applied to extract fuel oil from kinds of scrap rubber, tyre, plastic through pyrolysis, separating the crude carbon black and steel wires.

 

1. Fuel oil from waste tyre about 40%~45% widely used in below industries

 

A. power plant factory,

B. glass factory,

C. cement factory,

D. ceramic factory,

E. aluminum factory,

F. boiler factory,

G. central heating factory,

H. painting factory.

2. Carbon black from waste tyre about 30%~35% is used in below industries

A. electric cable jacketing

B. conveyor belt

C. hose and doormat

D. black nylon bag

E. rubber additives

F. automatic spare parts

G. heat isolation

H. black colorant in rubber materials

I. plastic pipes

J. industries rubber products

K. fire fighting.

 

3. Combustible gas

About 5% can be recycled and used during process as fuel or collected even compressed into liquid gas, used as fuel or to generate electricity.

 

4. This equipment is composed by these parts

1) Reactor

2) Desulfurization dedust

3) Water film cyclone

4) Bag dedusting

5) Draft fan

6) Gas separator

7) Depositing tank

8) Cooling pool

9) Oil tank

10) Waste gas recycle system

 

Selling points

1. Main power is only 3kw, save electricity and cost.

2. Half-Full open door, it can feed the whole tyre or small tyre into reactor,safety and economically.

3. High efficiency and easy to operate.

 

Safety

1) Pressure gauge, alarming device, safe valve.

2) We have anti-clogging device, in case of jam, there will be antomatic alaiming, automatic exhaust and automatic decompression.

3) Using Q345R boiler plate,The thickness of part by fire is 14/16/18mm

4) Automatic welding machine with heating treatment and x-ray detection will prolong the service life of reactor to the max, processing according to standard of head of pressure vessel.

5) With proprietary vacuum system, it is much safer on condition of negative pressure.

6)The service life of the reactor will be 5-6 years

 

Reactor in the making

 

 

Features 

Safety

1. With an auto welding machine for the reactor, it can not only greatly improve working efficiency but also guarantee the quality of welding seam, thus avoid explosion caused by gas leak. Professional heating treatment and x-ray detection chamber are especially for welding.

 2. Vacuum system will prevent oil gas from going back to reactor and causing accident.

 3. Professional thermometer, pressure gauge and safety valve.

 4. It is dangerous to burn exhaust gas (C1 to C4) without any safety measures. In our process, it is transferred first through the safety device and a safety burning air muzzle. Before burning, we should ensure the safety of production.

 

 

Technical Parameters for waste plastic recycling plant

ITEM	CONTENT
equipment’s model	XD-05	XD-08	XD-10
Daily Handling capacity	5 tons	8 tons	10 tons
Door's model	Semi-open door	Semi-open door	Semi-open door
Structure Form	Horizontal type	Horizontal type	Horizontal type
Raw material	Waste rubbers/tyres/plastic	Waste rubbers/tyres/plastic	Waste rubbers/tyres/plastic
Material of reactor	Q345R thickness 14mm	Q345R thickness 14mm	Q345R thickness 14mm
Main engine rotating speed	0.4R /min	0.4R /min	0.4R /min
Power	10-15KW	10-15KW	10-15KW
Cooling Mode	Water	Water	Water
Consumption of Cooling water	0.2	0.3	0.4
Heating Mode	Direct	Direct	Direct
Installation	Main engine integral installation	Main engine integral installation	Main engine integral installation
Noise dB (A)	<=85	<=85	<=85
Machine dimension(mm)	D2000*L6000	D2200*L6600	D2600*L6600
Working Mode	Intermittent	Intermittent	Intermittent

waste plastic recycling plant

Good Quality XD-10CAP waste plastic recycling plant